Ports Option
The Ports option contains communication port profiles. Pagers and functions that use serial port access use these profiles. To configure, right-click Ports and select New Item. Enter the following information:
- Port--The name of the communications port you want the pager message to be broadcast from.
- Data Bits--The number of data bits, 7 or 8, which your modem uses.
- Baud Rate--The baud rate used by your modem.
- Parity--The parity setting, none, odd, or even, of your modem.
- Stop Bits--The number of stop bits, 1 or 2, which your modem uses.
If you want these settings to apply to any function that uses serial port access, place a check mark in the Use As Default box. When you are finished configuring port information, click OK.
Note: Pager options are not supported on Japanese versions of Arcserve Backup.