Add a Storage Array for NetApp

This section provides information about how to add a storage array for NetApp storage vendor.

Follow these steps:

1. Go to Settings > Infrastructure, and then click Storage Arrays.
2. On the Storage Arrays page, click Add Storage Array button.
3. The Add Storage Array dialog appears.
3. From the Site drop-down list, select the required site.
4. From the Storage Vendor drop-down list, select NetApp.
5. From the Mode drop-down list, select one of the following:
• Standalone
• Cluster (SVM)
• vFiler
6. For Array IP, enter the SVM IP address.
7. For Data IP, enter the IP address of data.
8. Note: The Data IP option is not available for the Standalone mode.
8. Type the username and password as needed.
9. For Port, provide a port value. The default port value is 443.
10. For Protocol, select HTTP or HTTPS as needed.
11. Note: For a secure communication with the destination server, select the HTTPS protocol.
11. Click Save.

The storage array is added successfully.