Verify that the BMR was Successful

To verify that the BMR was successful, perform the following tasks:

• Reboot the operating system.
• Verify all systems and applications function correctly.

• Verify all network settings are properly configured.
• Verify the BIOS is configured to boot from the disk on which the boot volume was restored to.
• When the BMR is completed, be aware of the following conditions:
• The first backup that is performed after the BMR is a Verify Backup.
• When the machine has been rebooted, you may need to configure the network adapters manually if you restored to dissimilar hardware.

Note: When the machine is rebooting, a Windows Error Recovery screen may be displayed indicating that Windows did not shut down successfully. If this occurs, you can safely ignore this warning and continue to start Windows normally.

• For dynamic disks, if the status of the disk is offline, you can manually change it to online from the disk management UI (accessed by running the Diskmgmt.msc control utility).
• For dynamic disks, if the dynamic volumes are in a failed redundancy status, you can manually resynchronize the volumes from the disk management UI (accessed by running the Diskmgmt.msc control utility).