Managing Devices and Media › Device Management Tools › Configure Devices Using Enterprise Module Configuration
Configure Devices Using Enterprise Module Configuration
Enterprise Module Configuration is a wizard-like application that lets you configure the following devices:
- StorageTek ACSLS--The StorageTek ACSLS configuration option lets you configure or modify the configuration of a StorageTek ACSLS Library. With this option, the Arcserve Backup server can interface with the StorageTek ACSLS libraries to manage backup and restore operations, tape volume movement, and tape volume organization.
To configure StorageTek ACSLS library, ensure that it is properly installed and running before you start Enterprise Module Configuration.
For information about using StorageTek ACSLS libraries with Arcserve Backup, see the Enterprise Module Guide.
- IBM 3494--The IBM 3494 configuration option lets you configure or modify the configuration of an IBM 3494 library. With this option, you can use the full capabilities of Arcserve Backup with the large tape volume capacities of the IBM® TotalStorage® Enterprise Automated Tape Library 3494.
To configure IBM 3494 Libraries, ensure that the following configurations are complete before you start Enterprise Module Configuration:
- All libraries are properly attached to your network.
- IBM 3494 Automated Tape Library software is installed on the primary server.
For information about using IBM 3494 libraries with Arcserve Backup, see the Enterprise Module Guide.
- Image Option--The Image Option configuration option lets you install a driver on target systems to enable Image Option capabilities. With this option, you can perform high-speed backups by bypassing the file system, creating a snapshot image of the drive, and reading data blocks from the disk.
For information about backing up and restoring data using the Image Option, see the Enterprise Module Guide.
To configure devices using Enterprise Module Configuration
- From the Windows Start menu, click Start, point to Programs (or All Programs), Arcserve, Arcserve Backup, and click Enterprise Module Configuration.
The Enterprise Module Configuration, Options dialog opens.
- Click the button for the device that you want to configure, follow the prompts on the subsequent dialogs, and complete all required information.
Copyright © 2015 .
All rights reserved.
|
|