Amministrazione di Arcserve Backup › Risoluzione dei problemi › Problemi relativi ai supporti › Arcserve Backup Does Not Detect a Cleaning Tape

Arcserve Backup Does Not Detect a Cleaning Tape

Valido per piattaforme Windows.

Sintomo

There is a cleaning tape in the library but Arcserve Backup does not detect a cleaning tape.

Soluzione

To remedy this problem, Arcserve Backup must detect the location (slot) of the cleaning tape. There are two methods that you can use to let Arcserve Backup detect the location (slot) of the cleaning tape.

• Metodo 1: consentire a Arcserve Backup di rilevare la posizione (slot) del nastro di pulizia Per completare questa operazione, procedere come segue:
  1. Insert a cleaning tape into any available slot in your library.
  2. Open the Device Manager window, right-click the library and select Inventory from the pop-up menu.

     Arcserve Backup inventories the media in the slots. After the inventory process is complete, Arcserve Backup detects the presence of a cleaning tape. The slot where the cleaning tape resides becomes the cleaning slot.

• Metodo 2: specificare manualmente la posizione (slot) del nastro di pulizia Per completare questa operazione, procedere come segue:
  1. Open the Device Manager window, right-click the library and select Properties from the pop-up menu.

     Verrà visualizzata la finestra di dialogo Proprietà libreria.

  2. Click the Cleaning tab.

     The Cleaning options appear.

  3. From the Available Slots lists, click an available slot and then click the Add button.

     The available slot moves to the Clean Slots list.

  4. Click OK.
  5. Insert the cleaning tape into the slot specified.