Arcserve UDP Appliance Models 7100 - 7300v
|
|
Arcserve UDP 7000 Series Appliance Specifications |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Appliance Model |
7100 |
7200 |
7200V |
7300 |
7300V |
|||||||
Backup Storage Capacity |
|
|||||||||||
Raw Storage capacity* |
3 TB |
6 TB |
6 TB |
9 TB |
9 TB |
|||||||
Usable backup capacity** |
2.8 TB |
5.8 TB |
5.8 TB |
8.8 TB |
8.8 TB |
|||||||
Protected (source data) capacity*** |
Up to 8 TB |
Up to 17 TB |
Up to 17 TB |
Up to 26 TB |
Up to 26 TB |
|||||||
Standard Features |
|
|||||||||||
Unified management console, global deduplication, block level infinite incremental backups, compression, encryption, WAN optimized replication, advanced virtualization support, agentless backup, remote virtual standby, tape support, application consistent backups, granular restore, unified reporting and dashboard. |
||||||||||||
On-Appliance Virtual Standby |
N/A |
N/A |
Up to 3 VMs |
N/A |
Up to 3 VMs |
|||||||
Warranty and Technical Specifications |
|
|
|
|||||||||
Full System depot warranty |
|
3 Years |
||||||||||
Physical dimensions (H x W x D in inches) |
|
1.7" x 17.2" x 25.6" (1U - 19" Rack Mount rails provided) |
||||||||||
Remote management & network interface ports |
|
1 x IPMI & 2 x 1 GbE (RJ45) |
||||||||||
Hard Disk type & RAID configuration |
4 x 1 TB SAS (RAID 5) |
4 x 2 TB SAS (RAID 5) |
4 x 2 TB SAS (RAID 5) |
4 x 3 TB SAS (RAID 5) |
4 x 3 TB SAS (RAID 5) |
|||||||
External Tape Backup Connectivity (SAS, SATA, FC) |
|
1 x PASS |
||||||||||
Total system RAM |
16 GB |
16 GB |
32 GB |
32 GB |
48 GB |
|||||||
SSD drive (For deduplication hash tables) |
120 GB SSD |
120 GB SSD |
120 GB SSD |
240 GB SSD |
240 GB SSD |
|||||||
Maximum weight (lbs) |
|
41 lbs |
|
|||||||||
Power Supplies (Single or redundant) |
|
1 x 600W |
|
|||||||||
Power consumption (Watts @ idle/load/startup) |
93/116/143 |
122/164/143 |
125/167/145 |
125/167/145 |
129/188/152 |
|||||||
AC voltage & frequency range |
|
100v - 240v |
|
|||||||||
Ampere rating |
|
7.5A Max |
|
|||||||||
*1 TB = 1,000,000,000,000 bytes. ** On "V" models, space available for backup will be reduced by the size of virtual standby VMs. ***Estimated capacity assuming a typical 3:1 deduplication and compression ratio. Actual backup capacity may vary significantly, based upon data type, backup type, schedule, and more. |
Copyright © 2016 |
|