You can integrate the iSCSI volume to the target machine and make that volume a part of the target machine. Then you can restore data to the iSCSI volume of the target machine. By doing so, you can manage data and transfer data over a network.
Important! When you integrate the iSCSI volume with the target machine, you will lose all the existing data from the iSCSI volume.
Follow these steps:
The target machine boots into the Arcserve UDP Agent (Linux) Live CD environment. On the screen, the IP address of the target machine is displayed.
/etc/init.d/iscsid start
iscsiadm -m discovery -t sendtargets -p <ISCSI-SERVER-IP-ADDRESS>:<Port_Number>
The default port value of iSCSI target host is 3260.
#fdisk -l
iscsiadm -m node -T <iSCSI Target IQN name> -p <ISCSI-SERVER-IP-ADDRESS>:<Port_Number> -l
You can see a block device in the /dev directory of the target node.
#fdisk -l
You can see an additional device named /dev/sd<x> on the target node.
The iSCSI volume is integrated with the target volume.
Copyright © 2015 Arcserve.
All rights reserved.
|
|