Verify that the BMR was Successful

To verify that the BMR was successful, perform the following tasks:

Reboot the operating system.
Verify all systems and applications function correctly.
Verify all network settings are properly configured.
Verify the BIOS is configured to boot from the disk on which the boot volume was restored to.
When the BMR is completed, be aware of the following conditions:
- The first backup that is performed after the BMR is a Verify Backup.
- When the machine has been rebooted, you may need to configure the network adapters manually if you restored to dissimilar hardware.
  Note: When the machine is rebooting, a Windows Error Recovery screen may be displayed indicating that Windows did not shut down successfully. If this occurs, you can safely ignore this warning and continue to start Windows normally.
- For dynamic disks, if the status of the disk is offline, you can manually change it to online from the disk management UI (accessed by running the Diskmgmt.msc control utility).
- For dynamic disks, if the dynamic volumes are in a failed redundancy status, you can manually resynchronize the volumes from the disk management UI (accessed by running the Diskmgmt.msc control utility).