Use this option to mount (load) or dismount (remove) a magazine from the library. Mediante il montaggio di un caricatore viene avviato l'inventario degli slot. Durante lo smontaggio di un caricatore, invece, tutti i supporti vengono posizionati nuovamente negli slot principali e il caricatore viene preparato per la rimozione. The time this process requires varies based upon the number of media in the magazine you are mounting or dismounting. Additionally, the time required to mount and dismount magazines can vary from vendor to vendor.
This option checks the library slots and reads the media header. It then associates the media header with the slot in which it was found (its home slot). This enables the Tape Engine to keep track of any changes made to media in the library (media added to or removed from a magazine or moved to a different slot).
If you are using bar codes, each media that you load into a storage drive in the libraries must have a unique serial bar code number. If you purchased two media having identical serial numbers, you must use one of the media in a different backup session.
You should add and remove media only when the Tape Engine server is running, so that you can immediately inventory your slots.
Per montare e smontare un caricatore
Viene visualizzata la finestra di dialogo Monta/Smonta caricatore.
In base all'operazione che si desidera eseguire, fare clic su uno dei seguenti pulsanti:
Arcserve Backup mounts or dismounts the magazine.
|
Copyright © 2015
|
|