Using the Alert Manager › Alert Manager Configuration › SNMP Notification
SNMP Notification
You can use SNMP to send an SNMP trap to an SNMP manager. Examples of SNMP managers include HP OpenView, IBM NetView, and CA Unicenter TNG.
To configure SNMP settings, right-click SNMP and select New Item. When the SNMP Recipient page appears, enter the following information:
- Manager Name--Enter the name of the SNMP Manager.
- Send Via--Select one of the following options:
- IPX--If you select this, enter the 8-byte network address of the machine where the SNMP manager is located. Next, enter the 12-byte node address of the machine where the SNMP manager is located. Use this field for Novell networks.
- IP--If you select this, enter the IP address of the machine where the SNMP manager is located. Use this field if you are running the TCP/IP stack.
Copyright © 2015 .
All rights reserved.
|
|